THAI CALIBRATION SERVICES CO., LTD.

In the present, weighing scales have been used in many industries. The scales are used to inspect or measure the weight of products in order to check the product whether there are any mistakes in the products. If the weight value from the scales is not accurate, there is possibility that company may waste tremendous cost on fixing the problem from non-standard weight product.

Therefore, the calibration becomes very important to prevent those problems and to assure that the production line is in its best quality. To response the demand on the calibration, Thai Calibration Services Co., Ltd. provide the calibration services along certificate. We conduct calibration professionally and accurately according to ISO/IEC 17025:2017 in order to provide the most satisfactory services towards our customers.

EXPERIENCES MORE THAN 20 YEARS

We provide calibration services, weight adjustment, and distribute calibration weight, other calibration instruments along with complete certificate. Conduct calibration professionally and accurately with experiences more than 20 years

ISO/IEC 17025:2017

Our laboratory have been accredited ISO/IEO17025:2017 by Thai Industrial Standard Institute (TISI)

OUR PRODUCTS

We always select the best calibration instrument to comply with our customers’ requirement along with the certificate, so our customers can assure that they will receive the best quality products.

CALIBRATION SERVICES

We provide calibration services under our laboratory which have received ISO/IEO17025:2017 from Thai Industrial Standard Institute (TISI) under our own company “Thai Calibration Services Co., Ltd.”

MANUFACTURE AND DISTRIBUTE RM/CRM

Manufacture and distribute RM/CRM according to ISO 17034:2016

Company Profile

With more than 80 years experiences in design-manufacture-distribute-maintenance-calibration service for weighing scale and to response the demand for calibration in Thailand’s market, Thai Scale Co., Ltd. opens its own laboratory “Thai Calibration Services Co., Ltd” which have been accredited under ISO/IEC 17025:2017 from Thai Industrial Standard Institute (TISI)

Company name : Thai Calibration Services Co., Ltd

Address : 19/8 Moo 9 Soi Raiking 30, Puttamonton 5 Rd., Raiking, Samparn, Nakornpatom 73210 Thailand

TEL. : 0-349-7682-5 FAX: 0-3439-7687

Website : https://www.thaical.com  E-mail : info.thaical@gmail.com, info@thaical.com

Established : 2552

Managing Director : Mr. Viroj Lertnaitum

Registered Capital : 15,000,000 Baht

Associated Company : Thai Scale Co., Ltd.

Quality Policy : Calibration under ISO/IEC 17025:2017 with the latest instruments and professional team .

Objective :

  • Open new branch in Samut prakarn, Laem Chabang, Khonkaen, Chiangmai
  • Expand calibration field to response customer’s demand

Biography : Private sector laboratory which is able to provide calibration for the highest readability and capacity range in Thailand

  • Calibration weight
    • Class E2 Capacity 1 mg to 20 kg Class F1 Capacity 1 mg to 20 kg
    • Class F2  Capacity 1 mg to 100 kg Class M1 Capacity 1 mg to 500 kg
    • Class M2 and Lower Capacity 100 mg to 5 000 kg
  • Weighing scale Capacity up to 100 000 kg

Vision : Being a leading service provider for calibration service in Thailand in 2018

Mission :

      • Maintain service capability, and improve performance’s and staff’s potential for customer’s satisfactory.
      • improve and proceed under ISO/IEC 17025 and related law
      • Cooperate with National Institute of Metrology (Thailand) or related organization in term of development.

Policy for laboratory quality management system: following ISO/IEC 17025:2017 with up-to-date equipment, professional staff in order to get accurate, stable results. Proceeding unbiasedly and protecting our customers’ secret. Placing first priority on customers’ satisfactory. and being detemined to improve continuously.

Policy for CRM quality management system : Be determined to manufacture CRM which has international quality. Use the standard equipment by professional staff. Perform, improve the quality management system continuously in order to maintain our CRM quality. Respond to customer’s demand and build customer’s trust. Proceed under ISO/IEC 17025:2017 and ISO 17034:2016 and follow up in order to maintain the quality

The History Company

Thai Scale Co., Ltd. open the calibration laboratory at Factory Land 1 77/41-42, Puttamonton 5 Rd., Nakornpatom 73210

            • Installed weighing scale for calibrating the weight class F2 capacity 100 kg., only private company which provide the service in Thailand
            • Accredited ISO 9001: 2000, only weighing scale private company in Thailand at that time.
            • Accredited ISO/IEC 17025 (Certificate no.0044) for mass and scale laboratory.
            • The first weighing scale company which is accredited
            • Relocated to
            • 19/8 Moo9 Soi Raiking 30, Puttamonton 73210 Thailand
            • and apply for ISO/IEC 17025 : 1999 to be valuated due to relocate
            • accredited ISO/IEO17025:1999 (Certificate No. 0094)
            • for the mass and weighing scale laboratory
            • Accredited ISO/IEO 17025:2017 (Certificate No. 0094)
            • was accredited to expand the calibration range from 100kg to 500kg
            • Installed instruments for checking weighing scale and standard weight, their readability is up to 0.001 mg on october
            • Expanded the calibration range of the weight class E2, capacity 1mg-2kg
            • Expanded the calibration range up to 40 000 kg

The expanded range is accredited on October.

            • Calibration for weight class E2, capacity 1mg- 2kg
            • calibration up to 40,000kg capacity
            • Established “Thai Calibration Services Co., Ltd.” on 14th October 2009 with registered capital 5,000,000 baht
            • The calibration field is as per below
              • Mass
                • Weighing scale capacity up to 10 000 kg
              • Dimension: 0 to 600 mm
              • Volume: 50 L
              • Temperature: 15 oC to 45 oC
              • Humidity: 30 %RH to 90 %RH
              • Force: up to 100 kN
            • Increased registered capital to 15,000,000 baht
            • Accredited ISO/IEO17025:2005 ,(Certificate No. 0189)
            • Increased the calibration range as per below
              • Mass
                • Weight
                  • Class E2 1 mg to 20 kg
                  • Class F1 1 mg to 20 kg
                  • Class F2 1 mg to 100 kg
                  • Class M1 1 mg to 500 kg
                  • Class M2 1 mg to 1 000 kg
                • Weighing scale up to 50,000 kg
            • Accredited ISO/IEO17025:2005 (Certificate No. 0189)
            • Increased the calibration range as per below
              • Temperature -20 oC to 1 000 oC
              • Dimension Up to 2 000 mm
              • Force Up to 100 kN
              • Pressure Up to 1 000 bar
            • Accredited ISO/IEO17025:2005 (Certificate No. 0189)
              • Temperature -20 oC to 1 000 oC
            • Accredited ISO/IEO17025:2005 (Certificate No. 0189)
              • Dimension Up to 2 000 mm
            • Increased the calibration range as per below
              • Mass
                • Weight Class M2 2 000 kg
                • Weighing scale Up to 100 000 kg
              • Temperature
                • Moisture balance analyzer   50 oC to 180 oC
                • Moisture meter for Cereals&Maize 10 % to 28 %
              • Force Up to 450 kN
              • Pressure (On-site) Up to 700 bar
            • Accredited ISO/IEO17025:2005 (Certificate No. 0189)
              • Mass
                • Weight Class M2 2 000 kg
                • Scale Up to 100 000 kg
              • Tempearature
                • Moisture balance analyzer 50 oC to 180 oC
              • Dimension Up to 50 000 mm
              • Force Up to 450 kN
              • Pressure (On-site) Up to 700 bar
            • Increased the calibration range as per below
                • mass
                • Weight Class M2 5,000 kg

 

                • Temperature
                • Infrared thermometer 50 oC to 500 oC
                • Thermo-hygrometer&graph  10 oC to 50 oC and 15% to 90%
                • Digital & Dial Thermometer -40o

 

              • Dimension
                • Vernier Up to 1,500 mm

 

              • Force & Torque
                • Load cell with an indicator 1 N to 1,200 kN
                • UTM up to 2,000 kN
                • Push – Pull guage and force guage 1 N to 1,000 N
                • Wheel Load Scale Up to 20,000 kg
            • Increased the calibration range as per below
              • Pressure
                • Barometer Up to 900 mbar to 1060 mbar
                • Vacuum Gauge( Negative Pressure Gauge) -90 kPa to 0 kPa (-0.9 bar to 0 bar)
              • Volume Proving tank (Neck scale type) 5 L
            • Accredited ISO/IEO17025:2005 (Certificate No. 0189)
              • Mass
                • Weight Class M2 5 000 kg
                • Non-automatic weighing instruments Up to 100 000 kg (EURAMET cg-18)
              • Temperature
                • Thermo-Hygrometer & Graph 10 oC to 50 oC and 15 % to 90 %
                • Digital & Dial Thermometer -40 oC
              • Dimension :Vernier Up to 1 500 mm
              • Force :Load cell with an indicator  1 N to 1 200 kN
              • Pressure :Vacuum Gauge( Negative Pressure Gauge)
                • 90 kPa to 0 kPa (-0.9 bar to 0 bar)
              • Volume :Proving tank (Neck scale type) 5 L
            • Increased the calibration range as per below
              • Mass
                • Hydrometer 0.6 g/cm3to 2 g/cm3
              • Force & Torque
                • Hand Torque Tool  1 N*m to 2 000 N*m
              • Volume :Proving tank (Neck scale type) 10 L- 50 L
            • Increased the calibration range as per below
              • Mass
                • Weight Class M1 1 000 kg
              • Dimension
                • Coating thickness gauge   0 mm to 3 mm
              • Temperature
                • Water bath/Liquid bath ambient 5 oC to 100 oC
                • Autoclave 100 oC to 140 oC
                • Moisture meter for coffee & pulse 5 % to 28 %
              • Hardness
                • Rockwell hardness testing machine
              • Electric
                • Clamp meter,Digital multimeter ,Process meter
                • Metal detector Fe, Non-Fe, SUS
                • Permanent Magnetic up to 1.5 T (up to 15,000 G)
              • Pressure > 1,000 bar to 2,500 bar*
              • Manufacture CRM under ISO 17034
                • Grain, Rice (Paddy rice, Rice, Rrown rice), Corn

Certified laboratory ISO/IEC 17025:2017

Certification No. 0189

– Mass Laboratory

  • Class M1 1,000 kg
  • Automatic weighing instruments Up to 5 000 kg (Totalizing hopper weigher)

– Force & Torque Laboratory

UTM up to 2,000 kN

Push – Pull gauge and force gauge 1 N to 1,000 N

Wheel Load Scale Up to 20,000 kg

Crane scale Up to 100,000 kg

Hand Torque Tool 1N.m to 2,000 N.m

– Chemical Laboratory Proving tank (Neck scale type) 10 L- 50 L

  • Ø expand calibration range as per below

– Temperature Laboratory

  • Digital&Dial Thermometer >1,000 oC to 1,200 oC

– Fluid Machanic Laboratory

  • Flow meter

– Mass Laboratory

  • Weight Cart 2,500 kg to 3,000 kg
  • Automatic catchweighing instruments Up to 60 kg

– Chemical Laboratory

  •  pH meter , Refractometer , Conductivity
 We provide calibration services, weight adjustment, and distribute calibration weight, other calibration instruments along with complete certificate.

We conduct calibration professionally and accurately according to ISO/IEC 17025:2017 in order to provide the most satisfactory services towards our customers

Who should you choose Thai Calibration Services?

EXPERIENCES MORE THAN 20 YEARS

We provide calibration services, weight adjustment, and distribute calibration weight, other calibration instruments along with complete certificate. Conduct calibration professionally and accurately with experiences more than 20 years

ISO/IEC 17025:2017

Our laboratory have been accredited ISO/IEO17025:2017 by Thai Industrial Standard Institute (TISI)

OUR PRODUCTS

We always select the best calibration instrument to comply with our customers’ requirement along with the certificate, so our customers can assure that they will receive the best quality products.

CALIBRATION SERVICES

We provide calibration services under our laboratory which have received ISO/IEO17025:2017 from Thai Industrial Standard Institute (TISI) under our own company “Thai Calibration Services Co., Ltd.”

MANUFACTURE AND DISTRIBUTE RM/CRM

Manufacture and distribute RM/CRM according to ISO 17034:2016

OUR COMPANY IN PHOTOS